深圳市深宏远通风设备有限公司

深宏远风机的特点及使用范围：

高温、闷热、异味、烟尘、通风不良全部解决，新一代降温、通风换气的理想产品，现代厂房的最佳选择。

深宏远风机均采用CAD/CAM设计，具有投资少、通风效果显著，噪音低、耗能小、风量大、运行平稳、寿命长、效率高等特点并拥有百叶自动开启、关闭系统、达到防尘、防水、美观等效果，是现代化厂房降温通风的最佳选择。

深宏远风机通过负压抽风，以超强吸力，使室内与室外空气进行交换，将厂内热气、异味、污浊空气排出，原厂内空气排出后，由于负压作用，自然流入新鲜空气，使室内温度降低至与室外温度相同。如采用“风机+水帘”的负压降温系统室内即能马上达到降温5-10℃以上的效果，是最经济，最有效的夏季厂房降温措施。

负压风机根据厂房实际情况，计算每小时所需换气次数、换气量、进行优化配置，有效的解决高温闷热、空气污浊等实际问题。

A Pad-and-Fan cooling system typically consists of axial flow

深宏远六叶负压风机的特点：

Shen hong yuan Six of the suction ventilators features:

一、风扇叶片与多V皮带轮组的平衡校正由专业技术人员负责。采用国外先进技术电脑平衡校正仪器，等级达4级水准（G6.3），符合ISO1940钢性运转体技术,达国际品质要求。

1, fan blades and multi-V pulley group balance correction by professional technical staff. Use of advanced technology from abroad balance correction computer equipment, the standard grade of 4 (G6.3) and with the operation of the ISO1940 steel technologies to international quality requirements.

二、本机所匹配的1HP马达采用全铝合金外壳，密封严、抽风效能好、耗电量少、每小时只须0.75度电力。

2. This machine-match 1HP All motors used aluminum alloy shell, Seal strict,Good ventilation efficiency, Less power consumption, Only 0.75 per hour of electricity.

三、传动皮带采用PK多V皮带,耐磨损,运转时无传统皮带打滑及噪音的困扰。

3.more transmission belt use PK V belts, wear resistance, When running the not traditional belt slipping and noise nuisance.

四、百叶窗的设计运用空气顺流原理,不需要使用电力及人员开关,美观大方,且可以防雨水侵入。

4. Louver air downstream use of the design principles, Do not use electricity and personnel switch, handsome generous, and can prevent water intrusion.

五、主体外框采用FRP材质,可减少金属共鸣,且抗酸碱,防腐蚀,增加使用年限。(可连续使用10-20年)

5. FRP materials by the main frame, Metal resonance can be reduced ,And resistance

Acid-base,anti-corrosion, and increase life span. (Continuous use for 10-20 years).

深宏远负压风机的降温原理：

Shen hong yuan the suction ventilators coolingPrinciple:

负压风机是利用空气对流、负压换气的降温原理，由安装地点的对向---大门或窗户自然吸入新鲜空气,将室内闷热气体迅速，强制排出室外,任何通风不良问题均可改善,降温换气效果可达90%-97%。

suction ventilators Is to use air convection cooling principle of negative pressure ventilation, by the location of the installation of the doors or windows - to the natural inhalation of fresh air, indoor hot gas rapidly, from the mandatory outdoor, Any adverse problems can be improved ventilation, Ventilation cooling effect of up to 90% -97%.

EVAPORATIVE COOLING

(夏天在编织，洗染，生产&加工服装工厂等很容易达到40度用这种风机很容易降下7－12度。)

Temperature can easily exceed 40℃in spining,knitting,dyeing,finishing & garments factory during the summer if they are not equipped with cooling system.Such high temperature reduces product quality & worker productivity.Evaporative cooling is the most common method for reducing the temperature inside a factory.Air conditioning or refrigeratuib systems can be used,but their installation and operation costs are usually prohibitive.

Evaporative cooling is a process that reduces the temperature 7-12℃of air by the evaporation of water into the airstreams.As water is evaporated,energy is lost from the air reducing its temperature.Reduced temperature enters in to room and room become cool.

EVAPORATIVE COOLING PAD AND EXHAUST FAN SYSTEM

深宏远六叶负压风机参数表：

深宏远三叶负压风机参数表：